• End Cap for Spindle Liners

    End caps for spindle liners are made from steel and are designed to replace the standard end cap supplied with LDZ Air Cylinders. Spindle liner end caps include (3) tapped holes that are used to mount the spindle liner to the air cylinder assembly.

  • End Caps for Rotary Air/Coolant Unions

    End caps for rotary unions are made from steel and are intended to replace the standard end cap supplied with LDZ Air Cylinders. The threaded hole in the center of the rotary union end cap is tapped through making it possible to mount a pipe in the ID of the draw tube to deliver coolant or air to the workholding fixture.

  • Operating Valves

    HV operating valves are three position manually operated pneumatic valves that direct air flow to open and close MicroCentric air chucks and LDZ Air Cylinders.

    Each HV valve includes air hoses and fittings required for installation.

  • Air Filter/Regulator/Lubricator Units

    The FRL-15 is a combination air filter/regulator/lubricator unit that controls the air pressure to the chuck's built-in cylinder, and provides lubrication to the rotary air bearing assembly. This unit also filters contaminants from the air supply. Water that accumulates in the filter unit can be purged by a manual drain.

    Each unit includes a pressure gage, as well as air hoses and fittings.

  • Rotary Union

    A rotary union is required to supply coolant through the air tube assembly, or for the AL-Automatic Lubrication option. Rotary unions can be mounted to the rear of LDZ Air Cylinders to supply coolant or air through the machine spindle to the workholding fixture.

    The rotary union threads into the rear of the air tube and includes a hose and fittings.