• Adjustable draw tube to install collet and adjust tension
  • 6 inch diameter with 5C draw tube standard
  • 1.063" (27mm) through hole
  • 6,000 rpm
LDZ Air Cylinder Design & Features
MicroCentric LDN Air Cylinders feature a high performance precision rotary air bearing assembly. The air bearing incorporates a hardened steel journal and a housing supported by high speed ball bearings. This advanced proven design is combined with MicroCentric's precision manufacturing capability to produce a line of air cylinders of unmatched performance and reliability.

Air cylinders offer fine adjustment of draw tube force to prevent distortion of workpieces during clamping as compared to hydraulic actuators. And MicroCentric LDN Cylinders are virtually main tenance free. The only requirements are that air is continuously supplied to the rotary air bearing during rotation, and that the air is filtered and lubricated.

LDZ Air Cylinders can be adapted to all machine spindle and rotary table configurations to actuate jaw, collet, and diaphragm chucks. MicroCentric will supply spindle mounting plates and draw tubes as required, as well as a variety of precision workholding products to interface with LDN.
Unit of Measure

Size

N/A 6 in152 mm

Through Hole

N/A 1.063 in27 mm

Piston Stroke

N/A .394 in10 mm

Max. Air Pressure

N/A 150 psi10.5 kg/cm²
Draw Tube Force1 N/A 1,640 lbf745 kgf

Max. rpm

N/A 6,000

Weight

N/A 14.5 lb6.6 kg

Item No.

N/A 32 060 044

Mounting Plates & Draw Tubes

N/A Spindle mounting plates and draw tubes to adapt LDN Air Cylinders to a specific machine spindle or rotary table are quoted on request. a1146.jpg

Proximity Switches

N/A A proximity switch kit is available for most LDN Cylinders. Proximity switches provide a signal to the machine control to confirm whether the chuck or workholding fixture is clamped or unclamped.

Contact our sales engineers for information on proximity switch kits for LDN Cylinders.
a1147.jpg

Check Valves

N/A Special LDN Cylinders are avail able with integral check valves. Check valves will maintain air pressure in the cylinder and keep the chuck or workholding fixture clamped in the event there is an interruption to the air supply.

Contact our sales engineers for information on LDN Cylinders with check valves.
a1148.jpg
  • 1 at 100psi (7 kg/cm2)