Products Precision Air Chucks Precision Power Chucks Quick Change Collet Chucks S Pad Collet Chucks Conventional Collet Chucks Diaphragm Chucks Air Cylinders & Collet Closures Wide Opening Collets Quick Change Collets for
Multi Spindle Machines
Special Application Chucks
All Categories > Air Cylinders & Collet Closures > Air Cylinder Models > LDZ Standard Through Hole Models > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

LDZ Standard Through Hole Models

Check up to five results to perform an action.


  • Available in 6, 8, and 10 inch diameter models
  • 1.355" (34.4mm) through hole standard
  • Speeds to 6,000 rpm
  • Clamping Force up to 5,200 lbs (2,360 kg)
LDZ Air Cylinder Design & Features
MicroCentric LDZ Air Cylinders feature a high performance precision rotary air bearing assembly. The air bearing incorporates a hardened steel journal and a housing supported by high speed ball bearings. This advanced proven design is combined with MicroCentric's precision manufacturing capability to produce a line of air cylinders of unmatched performance and reliability.

Air cylinders offer fine adjustment of draw tube force to prevent distortion of workpieces during clamping as compared to hydraulic actuators. And MicroCentric LDZ Cylinders are virtually main tenance free. The only requirements are that air is continuously supplied to the rotary air bearing during rotation, and that the air is filtered and lubricated.

LDZ Air Cylinders can be adapted to all machine spindle and rotary table configurations to actuate jaw, collet, and diaphragm chucks. MicroCentric will supply spindle mounting plates and draw tubes as required, as well as a variety of precision workholding products to interface with LDZ.




Compare Items
   
  Results 1 - 3 of 3 Unit of Measure: Imperial Metric Both 1 

Model

Size

Through Hole

Piston Stroke

Max. Air Pressure

Draw Tube Force

Max. rpm

Weight

LDZ-150 6 in
152
mm
1.355 in
34.4
mm
.394 in
10
mm
150 psi
10.5
kg/cm²
1,640 lbf
745
kgf
6,000 12 lb
5.5
kg
LDZ-200 8 in
203
mm
1.355 in
34.4
mm
.710 in
18
mm
150 psi
10.5
kg/cm²
2,920 lbf
1,327
kgf
5,000 23 lb
10.5
kg
LDZ-250 10 in
254
mm
1.355 in
34.4
mm
.710 in
18
mm
150 psi
10.5
kg/cm²
5,200 lbf
2,364
kgf
4,000 32 lb
14.5
kg
  Results 1 - 3 of 3 1 
MicroCentric Corp. | Precision Workholding Technology