The NR series is a pneumatic or hydraulically actuated self-contained Pull Back design for stationary applications. The collet is coupled to the built-in piston and is drawn into the tapered seat as the chuck is actuated. Part stops and ejectors can be mounted inside the chuck body.

CB-NR Features
  • Self-contained design with built-in cylinder can be hydraulic or pneumatically operated
  • Pull Back design maximizes the efficiency of the clamping system by concentrating the chucking force in the direction of the machine table, in addition to drawing the workpiece against the part stop
  • Lubricated-for-life design requires minimal maintenance
  • All components hardened and precision ground for highest accuracy and long life.
Non-rotating dead length designs are quoted on request. CB120-NR & CB140-NR models are also quoted on request.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Model

Collet Model

Through Capacity

Clamping Range

Piston Stroke

Max. Hydraulic Force

Max. Clamp Force

Weight

N/A SK42BZI N/A 1.625 in42 mm N/A +/- .020 in+/- 0.5 mm N/A 0.16 in4 mm N/A 500 psi3.5 MPa N/A 9,420 lbf4,280 kgf N/A 18.6 lb8.5 kg
N/A SK65BZI N/A 2.625 in66 mm N/A +/- .020 in+/- 0.5 mm N/A 0.16 in4 mm N/A 500 psi3.5 MPa N/A 12,115 lbf5,510 kgf N/A 27.5 lb12.5 kg
N/A SK100BZI N/A 3.937 in100 mm N/A +/- .040 in+/- 1 mm N/A 0.275 in7 mm N/A 500 psi3.5 MPa N/A 17,500 lbf7,950 kgf N/A 54.6 lb24.8 kg
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1