The CB-NX series collet chuck is a low profile dead length design with a reduced diameter nose for maximum tool clearance. In this design the collet is coupled to the chuck body and remains stationary as the tapered seat moves forward when the chuck is actuated. This design keeps the collet in a fixed Z axis position during clamping and does not create a pull back effect on the bar stock or workpiece.

CB-NX Features

Dead Length design produces no pull back on the workpiece
• Reduced diameter nose and short overall length provides increased tool clearance and maximum utilization of the machine's Z axis
• Radial adjusting screws to true-up the chuck
• Lubricated-for-life design requires minimal maintenance
• All components hardened and precision ground for highest accuracy and long life
• Stop plates and stop housings can be mounted inside the chuck body for chucking applications requiring end stops or part ejectors

1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Model

Collet Model

Through Capacity

Clamping Range

Draw Tube Stroke

Max Draw Tube Force

Max. Clamp Force

Max Speed

Weight

Spindle Nose

N/A 65BZI N/A 2.625 in66 mm N/A +/- .020 in0.5 mm N/A .160 in4 mm N/A 10,116 lbf4588.74 kgf N/A 23,605 lbf10707.06 kgf N/A 6,000 rpm N/A 25.9 lb11.8 kg N/A A2-5
N/A 65BZI N/A 2.625 in66 mm N/A +/- .020 in0.5 mm N/A .160 in4 mm N/A 10,116 lbf4588.74 kgf N/A 23,605 lbf10707.06 kgf N/A 6,000 rpm N/A 27.7 lb12.6 kg N/A A2-6
N/A 65BZI N/A 2.625 in66 mm N/A +/- .020 in0.5 mm N/A .160 in4 mm N/A 10,116 lbf4588.74 kgf N/A 23,605 lbf10707.06 kgf N/A 6,000 rpm N/A 34.2 lb15.5 kg N/A A2-8
N/A 80BZI N/A 3.250 in82.5 mm N/A +/- .020 in0.5 mm N/A .160 in4 mm N/A 11,240 lbf5098.6 kgf N/A 25,853 lbf11726.78 kgf N/A 6,000 rpm N/A 35.6 lb16.1 kg N/A A2-6
N/A 80BZI N/A 3.250 in82.5 mm N/A +/- .020 in0.5 mm N/A .160 in4 mm N/A 11,240 lbf5098.6 kgf N/A 25,853 lbf11726.78 kgf N/A 6,000 rpm N/A 37.7 lb17.1 kg N/A A2-8
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1