Shafts can be machined complete between centers with MicroCentric's retractable collet chuck. A face driver mounted in the ID of the chuck drives the shaft as it is supported by the tailstock to turn the end of the shaft. When the chuck is actuated the collet moves forward to clamp the turned diameter enabling the OD of the shaft to be machined completed while the end of the shaft is securely clamped.
WSF Features
- Mounting for face driver in ID of chuck assembly
- Radial adjusting screws to true-up chuck assembly within .0002” (0.005mm)
- All components hardened and precision ground for highest accuracy and long life
Unit of Measure
Collet Model |
N/A 100BZI |
Max. Clamping Diameter |
N/A 4.000 in100 mm |
Min. Clamping Diameter |
N/A 1.000 in25 mm |
Spindle Nose |
N/A A2-11 |
Clamping Range |
N/A +/- .040 in+/- 1 mm |
Linear Chuck Stroke |
N/A 1.750 in44.45 mm |
Max. Clamp Force |
N/A 33,721 lbs150 kN |
Max. Speed |
N/A 3,000 rpm |
Weight |
N/A 174.96 lb79.35 kg |
Item No. |
N/A 15 100 180 |
A Dimension |
N/A 10.065 in255.65 mm |
