Shafts can be machined complete between centers with MicroCentric's retractable collet chuck. A face driver mounted in the ID of the chuck drives the shaft as it is supported by the tailstock to turn the end of the shaft. When the chuck is actuated the collet moves forward to clamp the turned diameter enabling the OD of the shaft to be machined completed while the end of the shaft is securely clamped.

WSF Features

  • Mounting for face driver in ID of chuck assembly
  • Radial adjusting screws to true-up chuck assembly within .0002” (0.005mm)
  • All components hardened and precision ground for highest accuracy and long life
Unit of Measure

Collet Model

N/A 65BZI

Max. Clamping Diameter

N/A 2.625 in66 mm

Min. Clamping Diameter

N/A 0.187 in5 mm

Spindle Nose

N/A A2-11

Clamping Range

N/A +/- .020 in0.5 mm

Linear Chuck Stroke

N/A 1.080 in27.43 mm

Max. Clamp Force

N/A 23,605 lbs105 kN

Max. Speed

N/A 4,000 rpm

Weight

N/A 95.6 lb43.36 kg

Item No.

N/A 15 065 192

A Dimension

N/A 7.4 in187.96 mm

B Dimension

N/A 2.405 in61.09 mm

C Dimension

N/A 10.95 in278.13 mm