QC jaw turning fixtures mirror the locating pattern of a QC chuck. They are used to rough and/or finish blank QC top jaws off-line, maximizing your machine's production capacity.
The clamping position of the jaw turning fixture is set in the middle of the chuck's stroke. Other positions are available upon request.
| Items |
 QC/JTF-4 QC Jaw Turning Fixtures |
QC/JTF-6 QC Jaw Turning Fixtures |
QC/JTF-8 QC Jaw Turning Fixtures |
QC/JTF-10 QC Jaw Turning Fixtures |
||||
| Chuck | 4 inch | 6 inch | 8 inch | 10 inch | ||||
| Outside Dia. | 4.125 in104.8 mm | 6.5 in165.1 mm | 7.95 in201.9 mm | 9.95 in252.7 mm | ||||
| Thickness | 1.281 in32.5 mm | 1.125 in28.6 mm | 1.25 in31.7 mm | 1.25 in31.7 mm | ||||
| Ordering Information |
Model of chuck must be specified when ordering. |
|||||||
| Item No. | 11 030 XXX | |||||||
|
|
||||||||
