MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back

Features

  • Patented RC Rapid Change Jaw System
  • Precision fit master jaws to minimize jaw lift
  • Hardened chuck body, actuators, and master jaws, for long term accuracy and performance

Repeating Accuracy

  • .0004” (0.01mm) TIR
Unit of Measure

Specifications

Jaw System

 N/A Rapid Change

Number of Jaws

 N/A 3
Repeating Accuracy1 N/A 0.0004 in0.01 mm

Chuck Diameter

 N/A 10 in254 mm

Through Hole

 N/A 3.228 in82 mm

Jaw Stroke

 N/A 0.335 in8.5 mm

Actuator Stroke

 N/A 0.787 in20 mm

Max. Draw Tube Force

 N/A 11,240 lbs50 kN

Max. Clamp Force

 N/A 26,970 lbs120 kN
Max. Speed2 N/A 4,500 rpm
Chuck Weight3 N/A 88.2 lb40 kg
Moment of Inertia4 N/A 31.09 lb-ft²1.31 kg-m²

Standard Equipment

N/A

  • Threaded draw tube adapters are furnished on request
  • A2-6, A2-6, A2-8, and various flat, threaded, and tapered nose spindle mounting plates are available on request.

Threaded Draw Tube Adapters & Spindle Mounting Plates

N/A

  • Threaded draw tube adapters are furnished on request
  • A2-6, A2-6, A2-8, and various flat, threaded, and tapered nose spindle mounting plates are available on request.
  • 1 Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force.
  • 2 With standard top jaws at max draw tube force.
  • 3 With standard top jaws and A2-6 (KSF-08) / A2-8 (KSF-10) spindle mounting plate.
  • 4 With standard top jaws and A2-6 (KSF-08) / A2-8 (KSF-10) spindle mounting plate.