MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back
Features
  • 10.00” (250mm) chuck diameter
  • 3 jaw and 2 jaw models
  • QC precision change jaw system
  • Standard and long stroke models
  • 2.60” (66mm) through hole
  • Precision fit master jaws to minimize jaw lift
  • Hardened chuck body, actuators, and masterjaws, for long term accuracy and performance
Repeating Accuracy
  • .0002” (0.005mm) TIR
Unit of Measure

Specifications

Accuracy1 N/A .0002 in0.005 mm

No. of Jaws

 N/A 3

Through Hole

 N/A 2.600 in66 mm
Jaw Stroke2 N/A .380 in9.6 mm

Actuator Stroke

 N/A .710 in18.0 mm

Max. Draw Tube Force

 N/A 31.6 lbs7,100 kN

Min. Draw Tube Force

 N/A 600 lbf2.7 kN
Max. Clamp Force3 N/A 12,780 lbs56.8 kN
Max. Speed4 N/A 2,500 rpm
Chuck Weight5 N/A 74.2 lb33.7 kg
Moment of Inertia6 N/A 7.03 lb-ft²0.30 kg-m²

Standard Equipment

N/A

  • Blank draw tube adapter
  • Blank top jaws, chuck lubricant, and grease guns are sold separately.

    • Threaded Draw Tube Adapters & Spindle Mounting Plates

    N/A

  • Threaded draw tube adapters are furnished on request
  • A2-6, A2-8 as well as other spindle mounting plates are available on request.

    • 1 Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force.
    • 2 Total jaw stroke.
    • 3 Total clamping force.
    • 4 Maximum speed with standard top jaw at max draw tube force.
    • 5 Without top jaws and spindle mounting plate.
    • 6 Without top jaws and spindle mounting plate.