MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back

The CB-NDR is a patented Dead Length design for use with servo stop bar loaders. Unlike conventional dead length collet chucks, the NDR is actuated as the draw tube is drawn toward the machine spindle to prevent the bar from being pushed off the servo stop.

CB-NDR Features
  • Pull to Close Dead Length design produces no pull back and will not push the bar off the servo stop
  • Radial adjusting screws to true-up the chuck assembly within .0002” (0.005mm)
  • Lubricated-for-life design requires minimal maintenance
  • All components hardened and precision ground for highest accuracy and long life
Unit of Measure

Specifications

Collet Model

 N/A SK80BZI

Max. Clamping Diameter

 N/A 3.250 in82.5 mm

Min. Clamping Diameter

 N/A 0.500 in12 mm

Spindle Nose

 N/A A2-6

Accuracy

 N/A .0008 in0.020 mm

Clamping Range

 N/A +/- .020 in+/- 0.5 mm

Linear Chuck Stroke

 N/A .480 in12.2 mm

Max. Clamp Force

 N/A 25,853 lbs115 kN

Max. Speed

 N/A 5,000 rpm

Max. Draw Tube Thread

 N/A M80x2

Weight

 N/A 57.8 lb26.2 kg

A Dimension

 N/A 6.245 in158.62 mm

Item No.

 N/A 15 080 300

Standard Equipment

N/A CB-NDR chucks include a spindle adapter plate and a blank draw tube connector. Threaded draw tube connectors for specific machine configurations are furnished at no additional charge if draw tube dimensions are provided with purchase order.