Chuck Features
  • Dead length design with reduced nose
  • All components are hardened alloy steel precision ground for accuracy and long term performance.
  • Internal components are sealed to prevent chip accumulation inside chuck body.
  • Modular chuck design can be adapted to any machine spindle and draw tube configuration.
  • Call for spindle mountings not listed.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Model

Collet Model

Spindle Nose

Max Speed

Through Capacity

Draw Tube Stroke

Max Draw Tube Force

Chuck Weight

N/A 16C N/A A2-5 N/A 6,000 rpm N/A 1.625 in41.2 mm N/A 0.078 in2.0 mm N/A 5,400 lbf2,450 kgf N/A 29.0 lb12.9 kg
N/A 16C N/A A2-6 N/A 6,000 rpm N/A 1.625 in41.2 mm N/A 0.078 in2.0 mm N/A 5,400 lbf2,450 kgf N/A 30.2 lb13.4 kg
N/A 16C N/A A2-8 N/A 6,000 rpm N/A 1.625 in41.2 mm N/A 0.078 in2.0 mm N/A 5,400 lbf2,450 kgf N/A 36.7 lb16.3 kg
N/A 16C N/A 140mm N/A 6,000 rpm N/A 1.625 in41.2 mm N/A 0.078 in2.0 mm N/A 5,400 lbf2,450 kgf N/A 29.0 lb12.9 kg
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1