Products Catalog

Features

4.33” (110mm) chuck diameter
3 jaw and 2 jaw models
QC precision change jaw system and dowel pin located models
Standard and long stroke models
1.063” (27mm) through hole
Precision fit master jaws to minimize jaw lift
Hardened chuck body, actuators, and master jaws, for long term accuracy and performance

Repeating Accuracy

.0001” (0.0025mm) TIR

Request Information

Unit of Measure

Items	PPC110D-3/QC PPC110D Precision Power Chuck Models	PPC110D-2/QC PPC110D Precision Power Chuck Models	PPC110D-3/DP PPC110D Precision Power Chuck Models	PPC110D-2/DP PPC110D Precision Power Chuck Models	PPC110DL-3/QC PPC110D Precision Power Chuck Models
Accuracy¹	N/A .0001 in.0025 mm
No. of Jaws	N/A 3	N/A 2	N/A 3	N/A 2	N/A 3
Through Hole	N/A 1.063 in27 mm
Jaw Stroke²	N/A .120 in3.0 mm	N/A .120 in3.0 mm	N/A .120 in3.0 mm	N/A .120 in3.0 mm	N/A .180 in4.6 mm
Actuator Stroke	N/A .340 in8.6 mm
Min. Draw Tube Force	N/A 250 lbf1.1 kN
Max. Clamp Force³	N/A 4,600 lbs20.5 kN	N/A 3,065 lbs13.6 kN	N/A 4,600 lbs20.5 kN	N/A 3,065 lbs13.6 kN	N/A 3,760 lbs16.7 kN
Max. Speed⁴	N/A 6,000 rpm	N/A 6,000 rpm	N/A 6,000 rpm	N/A 6,000 rpm	N/A 5,000 rpm
Chuck Weight⁵	N/A 7.0 lb3.2 kg
Moment of Inertia⁶	N/A .13 lb-ft²0.005 kg-m²
Item No.	N/A 14 504 039	N/A 14 504 041	N/A 14 504 040	N/A 14 504 043	N/A
¹ Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force. ² Total jaw stroke. ³ Total clamping force. ⁴ Maximum speed with standard top jaw at max draw tube force. ⁵ Without top jaws and spindle mounting plate. ⁶ Without top jaws and spindle mounting plate.