Request Information
Design
Self-contained design with built-in air cylinder. Air ports are located on the side of the chuck body for stationary use.

Application
OD and ID chucking for milling, drilling, inspection, or any other non- rotating application requiring high concentricity and/or close workpiece roundness. The inherent spring characteristic of the diaphragm allows workpieces to be clamped without continuous air supply for pallet and tombstone applications.
Unit of Measure

Chuck Size

 N/A 5.98 in152 mm

Repeating Accuracy

 N/A .0001 in.0025 mm

No. of Jaws

 N/A 6
Jaw Stroke1 N/A .060 in1.5 mm

Max. Jaw Force

 N/A 6,090 lbf2,768 kgf

Max. Air Pressure

 N/A 100 psi7.1 kg/cm²
Weight2 N/A 14.3 lb6.5 kg

A Dimension

 N/A 5.98 in182 mm

B Dimension

 N/A 4.920 in125 mm

E Dimension

 N/A .120 in3.0 mm

F Dimension

 N/A 2.19 in55.6 mm

G Dimension

 N/A 6.38 in163.1 mm

H Dimension

 N/A 5.350 in135.9 mm

J Dimension

 N/A M6

Item No.

 N/A 40 150 021

Ordering Information

 N/A MMR Diaphragms, AAS Part Stop Spiders and SMR Blank Top Jaws are not included Diaphram Chucks but are standard equipment.

Available Standard Equipment

 N/A AAS Part Stop Spider
, AAS Part Stop Spider
MMR Diaphragms
, MMR Diaphragms
SMR Blank Top Jaws
, SMR Blank Top Jaws
SMR Blank Top Jaws
, SMR Blank Top Jaws
SMR Blank Top Jaws
, SMR Blank Top Jaws
SMR Blank Top Jaws
, SMR Blank Top Jaws
  • 1 Jaw stroke on diameter with 1.50" high top jaws
  • 2 Without top jaws