MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back
Design
Draw tube operated design. Can be actuated with either a hydraulic or pneumatic cylinder mounted at the rear of the machine spindle.

Application
OD and ID chucking for cylindrical grinding, turning, and hard turning. Ideal for workpieces requiring high concentricity, and applications requiring high chucking force and/or high spindle speeds.
Unit of Measure

Specifications

Chuck Size

 N/A 10 in294 mm

Repeating Accuracy

 N/A .0001 in.0025 mm

No. of Jaws

 N/A 6
Jaw Stroke1 N/A .120 in2 mm

Max. Jaw Force

 N/A 43,110 lbf19,600 kgf
Max. rpm2 N/A 3,500
Weight3 N/A 109.4 lb49.7 kg

A Dimension

 N/A 11.57 in293.9 mm
B Dimension4 N/A A2-11

C Dimension

 N/A M20

D Dimension

 N/A .829 in21.0 mm

F Dimension

 N/A 4.19 in105.9 mm

G Dimension

 N/A 12.05 in306 mm

H Dimension

 N/A 10.050 in266.7 mm

J Dimension

 N/A M10

Item No.

 N/A 41 300 002

Ordering Information

 N/A MMR Diaphragms, AAS Part Stop Spiders and SMR Blank Top Jaws are not included Diaphram Chucks but are standard equipment.

Standard Equipment

Available Standard Equipment

 N/A AAS Part Stop Spider
ASS-300, AAS Part Stop Spider
MMR Diaphragms
MMR-300-6, MMR Diaphragms
SMR Blank Top Jaws
SMR-300-38S, SMR Blank Top Jaws
SMR Blank Top Jaws
SMR-300-50S, SMR Blank Top Jaws
SMR Blank Top Jaws
SMR-300-75S, SMR Blank Top Jaws
  • 1 Jaw stroke on diameter with 1.50" high top jaws
  • 2 Max. rpm is influenced by draw tube force and weight of top jaws
  • 3 Weight without top jaws
  • 4 Other mounting configurations available upon request