• MMR Diaphragms
MMR diaphragms are used with SMR series top jaws which are bolted on from the rear of the diaphragm. This eliminates the possibility of having an interrupted clamping diameter since there are no counterbored mounting holes in the top jaws. MMR diaphragms are also available in 2, 3, and 8 jaw configurations.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Model

Chuck Size

No. of Jaws

Diameter

Height

N/A 3 in81 mm N/A 6 N/A 3.19 in81 mm N/A .63 in16 mm
N/A 4 in102 mm N/A 6 N/A 4.02 in102.1 mm N/A .71 in18 mm
N/A 5 in127 mm N/A 6 N/A 5.00 in127 mm N/A .71 in18 mm
N/A 6 in152 mm N/A 6 N/A 5.98 in152 mm N/A .70 in17.7 mm
N/A 8 in204 mm N/A 6 N/A 8.03 in204 mm N/A .69 in17.5 mm
N/A 10 in254 mm N/A 6 N/A 10.00 in254 mm N/A .87 in22 mm
N/A 12 in294 mm N/A 6 N/A 11.57 in293.9 mm N/A 1.02 in25.9 mm
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1