• 5W & 16W Wide Opening Collet Chucks
Collet & Chuck Features
  • 5W wide opening collets are designed to grip over the shoulder of headed parts
  • Collets open up to .394" (10mm) above the nominal clamping diameter
  • Six segmented double angle design collet with ID thread for mounting part stops or ejectors
  • Dead length chuck design
  • Chuck components are hardened alloy steel precision ground for accuracy and long term performance
  • Internal components are sealed to prevent chip accumulation inside chuck body
  • Modular chuck design can be adapted to any machine spindle and draw tube configuration.
  • Call for spindle mountings not listed
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Model

Collet Model

Spindle Nose

Max. Speed

Through Capacity

Linear Chuck Stroke

Chuck Weight

N/A 5W N/A A2-4 N/A 6,000 rpm N/A 1.062 in27 mm N/A .370 in9.4 mm N/A 13.4 lb6 kg
N/A 5W N/A A2-5 N/A 6,000 rpm N/A 1.062 in27 mm N/A .370 in9.4 mm N/A 14.6 lb6.5 kg
N/A 5W N/A 140mm N/A 6,000 rpm N/A 1.062 in27 mm N/A .370 in9.4 mm N/A 14.6 lb6.5 kg
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1